English
Incoloy alloys are nickel-iron-chromium based materials engineered for reliable performance in high-temperature and corrosive environments. They offer a balanced combination of oxidation resistance, creep strength, and structural stability under elevated thermal conditions. Compared with stainless steels, which typically experience significant strength and oxidation limitations above ~600°C, Incoloy grades provide improved high-temperature stability and longer service life in thermal environments. Compared with Inconel alloys, Incoloy offers a more cost-efficient solution where extreme mechanical strength is not the primary requirement, while long-term heat and corrosion resistance remains critical..
Incoloy vs Inconel vs Stainless Steel Comparison
|
Property |
Stainless Steel |
Incoloy Alloy |
|
|
Base Composition |
Fe–Cr |
Ni–Fe–Cr |
Ni–Cr (high nickel) |
|
Continuous Temperature Range |
≤600°C |
600–900°C (up to ~1100°C depending on grade) |
600–1100°C+ |
|
High-Temperature Strength |
Limited |
Moderate–Good |
Excellent |
|
Oxidation Resistance |
Moderate |
Good |
Excellent |
|
Creep Resistance |
Low–Moderate |
Moderate–High |
Very High |
|
Strength Level |
Medium |
Medium–High |
Very High |
|
Cost Level |
Low |
Medium |
High |
|
Industrial Position |
General industrial use |
Balanced high-temperature alloy |
Extreme environment superalloy |
Explore our available Incoloy grades below to identify the most suitable material based on temperature, corrosion environment, and mechanical performance requirements.
|
Incoloy Grade |
Primary Advantage |
Service Environment |
Temperature Range |
Common Applications |
|
Excellent oxidation & carburization resistance |
Oxidizing / carburizing atmospheres, high-temp gas environments |
Up to ~1100°C (typical) |
Heat exchangers, furnace equipment, reformer components |
|
|
Improved creep and rupture strength at high temperature |
High-temperature pressure and stress environments |
600–900°C (typical) |
Petrochemical reformers, ethylene furnaces, process piping |
|
|
Superior long-term thermal stability |
Continuous high-temperature service conditions |
700–1100°C (typical) |
Power generation systems, industrial furnaces, heat treatment equipment |
|
|
Outstanding resistance to acids (sulfuric & phosphoric acid) |
Strongly corrosive chemical environments |
Up to ~540°C |
Chemical processing plants, acid production, pollution control systems |
|
|
High strength + corrosion resistance in sour environments |
Oil & gas (H₂S, chloride-containing media) |
Up to ~540°C |
Downhole tubing, valves, fasteners, oilfield equipment |
|
|
Superior resistance to chloride-induced corrosion |
Seawater, offshore, high-chloride environments |
Up to ~400°C |
Offshore platforms, desalination plants, marine systems |
|
|
Exceptional resistance to sulfuric acid and chemical corrosion |
Sulfuric acid processing, chemical manufacturing environments |
Up to ~540°C |
Chemical reactors, storage tanks, piping systems, pickling equipment |
|
|
Excellent resistance to sulfuric acid, phosphoric acid, and chloride attack |
Acidic and chloride-containing process environments |
Up to ~450°C |
Fertilizer plants, flue gas desulfurization systems, offshore processing equipment |
|
|
High mechanical strength and oxidation resistance at elevated temperatures |
High-stress, high-temperature applications |
Up to ~700°C |
Aerospace fasteners, gas turbine components, industrial bolting, automotive turbocharger parts |
Send us your operating conditions and application requirements — our engineering team will recommend the
most suitable alloy and provide a competitive quotation.
We supply a full range of Incoloy alloy grades to meet different temperature, corrosion and strength requirements.
INCOLOY A-286 is an iron-based precipitation-hardened high-temperature alloy. It forms γ' strengthening phases (Ni₃(Al, Ti)) by adding aluminum, titanium, and vanadium, exhibiting excellent...
INCOLOY 926 is a super austenitic stainless steel (nickel-iron-chromium-molybdenum-copper-nitrogen alloy) with exceptional resistance to pitting corrosion, crevice corrosion, and stress corrosion...
INCOLOY 925 is a nickel-iron-chromium-based precipitation-hardening alloy strengthened by the precipitation of γ'' and γ' phases through the addition of molybdenum, copper, aluminum, and titanium....
Incoloy 825 is a nickel-iron-chromium alloy enhanced with molybdenum, copper, and titanium, offering excellent corrosion resistance, particularly in reducing acids (such as sulfuric acid and...
INCOLOY 800HT is a nickel-iron-chromium-based solid-solution strengthened alloy with added aluminum and titanium. By strictly controlling the carbon content (0.06-0.10%) and higher total Al+Ti...
INCOLOY 800H is a nickel-iron-chromium-based solid-solution strengthened alloy with added aluminum and titanium, designed for high-temperature environments. It exhibits excellent resistance to...
INCOLOY 800 is a nickel-iron-chromium-based solid-solution strengthened alloy, characterized by excellent high-temperature strength, good oxidation resistance, and carbon penetration resistance....
INCOLOY 028 is a nickel-iron-chromium-based solid-solution strengthened alloy with added molybdenum and copper, specifically designed for extreme acidic environments containing hydrogen sulfide...
INCOLOY 020 is a nickel-iron-chromium-based solid-solution strengthened alloy, with copper and molybdenum added to enhance its corrosion resistance. This alloy exhibits excellent resistance to...
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|
|
Form |
Bar |
Plate |
Tube |
Wire |
Strip |
|
Size Range |
Ø6mm – 500mm |
Thickness: 0.5 - 100 mm |
Outer diameter Φ10-300mm |
Diameter Φ0.5-10mm |
Thickness: 0.1 – 3.0 mm |
|
Surface Finish |
Hot Rolled (HR), Cold Drawn (CD), Peeled, Turned, Ground, Polished (Bright), Black Surface |
Hot Rolled (HR), Pickled & Oiled (PO), Annealed, Solution Annealed, Polished Finish |
Bright Annealed (BA), Pickled & Annealed, Polished, Seamless Mill Finish |
Bright Drawn, Annealed, Soft Annealed, Spool Wound Finish |
Cold Rolled (CR), Bright Annealed, Soft Annealed, Slit Edge / Mill Edge Finish |
|
Standards |
ASTM B166/ASME SB166 |
ASTM B168/ASME SB168 |
ASTM B163/ASTM B829/ASME SB163 |
ASTM B166/ASTM B564/ASME SB166 |
ASTM B168/ASTM B906/ASME SB168 |
Our Incoloy alloys are used in a wide range of industrial applications requiring high-temperature stability and corrosion resistance.
Chemical Processing Industry
Incoloy alloys are commonly used in chemical processing equipment such as reactors, pressure vessels, piping systems, and heat exchangers exposed to acidic and chloride-containing media. Depending on the grade, Incoloy alloys provide resistance to sulfuric acid, phosphoric acid, and chloride-induced corrosion, making them suitable for aggressive chemical environments where material degradation is a critical concern.
Power Generation Industry
Incoloy alloys are applied in thermal power plants, nuclear power systems, and energy recovery systems where long-term exposure to elevated temperatures is required. Their ability to maintain mechanical strength and oxidation resistance under sustained thermal loading makes them suitable for components such as boiler tubes, superheater elements, and high-temperature steam piping.
Oil & Gas Industry
Incoloy alloys are widely used in upstream and downstream oil and gas operations where materials are exposed to high pressure, corrosive fluids, and sour gas (H₂S) environments. Grades such as Incoloy 825 and 925 are particularly suitable for chloride-containing and sulfide-rich conditions due to their balanced corrosion resistance and mechanical strength.
Marine Engineering
Incoloy alloys are used in marine and offshore environments where seawater exposure and chloride-induced corrosion are major challenges. Their resistance to pitting and crevice corrosion makes them suitable for long-term service in seawater systems and offshore structures.
As a professional manufacturer of nickel-based alloys, we focus on delivering stable quality, consistent performance,
and reliable supply for demanding industrial applications worldwide.
Reliable Technical Support for Material Selection
We offer pre-sales engineering support to help customers select the most suitable Incoloy grade based on operating conditions such as temperature, corrosion environment, pressure, and mechanical load.
Our engineering team also provides production-stage technical guidance and troubleshooting support. For critical or complex applications, on-site technical assistance can be arranged upon request.
Quality Assurance & Full Traceability
All delivered products are supplied with complete material traceability documentation, ensuring full transparency from raw material to final product.
Third-party inspection by internationally recognized laboratories (CNAS / ILAC accredited) can be arranged upon customer request to ensure compliance with project specifications and international standards.
Flexible Manufacturing Capability
We support small-batch, multi-specification, and urgent delivery requirements through flexible production scheduling and advanced manufacturing systems.
This enables fast response to customized specifications while maintaining stable mechanical performance and strict quality control across all production batches.
Engineering Patents & Process Innovation
We hold multiple national invention and utility model patents related to nickel-based alloy processing technologies, including controlled melting processes, heat treatment optimization, and surface engineering improvements.
These technologies enhance the stability, corrosion resistance, and high-temperature performance of our Incoloy alloy products in demanding industrial environments.
With abundant experience, we are one of the most professional incoloy alloy manufacturers and suppliers in China. We are committed to providing high quality metal products for global clients. Please feel free to wholesale bulk high-grade incoloy alloy in stock here from our factory.
Please inform us of your requirements regardingmaterial grade, product form, or applications, andour technical team will provide a suitable solutionand a fast quotation.
Get in Touch
