API 5CT L80-1

API 5CT L80-1

Brief Introduction to the Core Features of API 5CT L80-1
API 5CT L80-1 is a widely used anti-sulfur carbon steel grade of oil and casing pipes under the API Spec 5CT standard. It has a minimum yield strength of 80,000 psi (552 MPa), a maximum yield strength of 95,000 psi (655 MPa), and a minimum tensile strength of 95,000 psi (655 MPa). API 5CT is an internationally recognized standard for oil and casing pipes. The L80-1 grade of this standard permits ERW (Electric Resistance Welded) straight-seam resistance-welded pipes, but the commercial market is almost entirely supplied with seamless pipes.It is suitable for medium-deep and deep wells containing hydrogen sulfide, as well as drilling, completion, and oil production operations involving CO₂ corrosion.
L80-1 is produced using a quenching and tempering process, resulting in a tempered martensite microstructure. It exhibits excellent resistance to sulfide stress cracking (SSCC) and is widely used in acidic oil and gas wells containing H₂S. The basic supply grade of L80-1 is PSL1; PSL2 involves additional requirements specified in Annex-H. PSL2 must be explicitly agreed upon in the purchase contract to be implemented and is not supplied by default. It is suitable for conventional acidic well conditions containing H₂S. The product complies with API Spec 5CT, ISO 11960, and GB/T 19830.
Note: L80-1 is suitable for general H₂S-containing acidic service conditions. For extreme high H₂S, high chloride, and strongly acidic severe service conditions, it is recommended to select the 13Cr corrosion-resistant alloy series.
Send Inquiry
Description
Technical Parameters

Products Features

High-Temperature Oxidation Resistance

Comprehensive high-strength and sulfur-resistant performance (core advantage)

L80-1 Core Advantages: Through tempering treatment, it obtains tempered martensite microstructure, which has higher strength than J55/K55. It also possesses API standard-approved resistance to sulfide stress cracking. Balancing strength and anti-sulfur capability, it is a highly cost-effective seamless oil casing pipe for conventional acidic oil and gas wells.

Performance indicators

PSL1 Requirements

Minimum Yield Strength (MPa)

552

Maximum Yield Strength (MPa)

655

Minimum Tensile Strength (MPa)

655

Maximum Tensile Strength (MPa)

-

Yield strength ratio

No mandatory requirements

Elongation

Calculate and determine using the tabular formula from API Spec 5CT

Note: L80-1 yield strength range 552-655 MPa; higher strength than J55 and K55; has conventional resistance to H₂S sulfide stress cracking; not suitable for extreme corrosive conditions; 13Cr series corrosion-resistant alloys should be selected for strong corrosive environments. 

High-Temperature Corrosion Resistance

Good welding performance (core requirement for casing and tubing)

API 5CT L80-1 pipe is subjected to quenching and tempering heat treatment. Welding requires strict process control to meet on-site construction and coupling welding requirements. The carbon content of L80-1 is generally ≤0.40%, and the manganese content is controlled according to API specifications. As a tempered steel, L80-1 has a risk of hardening in the heat-affected zone of welding, and its welding process requirements are higher than those for J55/K55 carbon steels.

Key Welding Points:

  • Strictly implement WPS welding procedure qualification, control heat input, reduce the hardening tendency of the heat-affected zone, and minimize the risk of cold cracks
  • Strictly control harmful impurities P and S to ensure the purity of the base material and weld seam

L80-1 is a tempered sour-resistant steel with strict welding process requirements. For thick-walled joints, preheating of 100-150°C is recommended. This is an engineering practice experience value; the API standard does not mandate a preheating temperature, and actual operations shall comply with the WPS welding procedure qualification. The sulfide stress cracking resistance of the weld and heat-affected zone is no longer guaranteed after welding.

High Stability

Good toughness and resistance to brittle fracture

L80-1 is only available at PSL1 level. Under API standards, Charpy impact testing is not mandatory for PSL1; however, it is mandatory for PSL2 (after Annex-H is activated). The base microstructure is tempered martensite, which meets the requirements for service in medium-deep wells and sour oil and gas wells under normal temperature conditions. For low-temperature severe service conditions, impact test requirements need to be agreed upon in the contract.

Typical impact requirements (to be implemented only if agreed in the contract or Annex-H is activated):

  • Test Temperature: According to the user's project requirements
  • Impact energy: as agreed in the procurement agreement
Good Processability

Good corrosion resistance and environmental adaptability

API 5CT L80-1 has the ability to resist H₂S sulfide stress cracking (SSCC) and is suitable for conventional oil and gas media containing H₂S; it has a certain tolerance to CO₂, but corrosion assessment is required for conditions with higher CO₂ partial pressure.
Note: L80-1 is a sulfur-resistant carbon steel, not stainless steel; for high chloride ion and extremely corrosive environments, corrosion-resistant alloys such as 13Cr should be selected.

High-Temperature Oxidation Resistance

Good cold bending and processing performance

API 5CT L80-1 is a quenched and tempered seamless steel pipe, cold bending requires strict control of deformation. It can be hot bent to make elbows. The pipe ends support thread cutting, upsetting, and beveling. They can be processed into STC/LTC/BTC and Premium special thread connections, meeting the API 5CT thread and coupling technical requirements.

Technical Specification

Chemical Composition(API Spec 5CT / ISO 11960,L80-1)

 

Element

PSL1

Note

C

≤ 0.40%

Control carbon content, welding and tempering properties

Mn

≤ 1.60%

Solid solution strengthening

P

≤ 0.030%

Harmful impurities, strictly controlled

S

≤ 0.030%

Harmful impurities, strictly controlled

Si

≤ 0.45%

Deoxidation, reinforced matrix

CEIIW

No mandatory requirements

 

Physical Properties

 

Property

Value/Range

Test Conditions

Density

≈ 7.85 g/cm³

Room Temperature (20°C)

Melting Point

≈ 1420–1460℃

---

Elastic modulus

≈ 207 GPa

Room Temperature

Thermal Conductivity

≈ 47 W/(m·K)

Room Temperature

Coefficient of Thermal Expansion (20-100°C)

≈ 12.0 × 10⁻⁶ /K

---

Poisson's ratio

≈ 0.28

Room Temperature

Mechanical Properties (Typical value)

 

Performance

PSL1

Implementation standards

Minimum Yield Strength

552 MPa

API Spec 5CT / ISO 11960

Maximum Yield Strength

655 MPa

API Spec 5CT / ISO 11960

Minimum Tensile Strength

655 MPa

API Spec 5CT / ISO 11960

Maximum Tensile Strength

-

API Spec 5CT / ISO 11960

Elongation

Calculate and determine using the tabular formula from API Spec 5CT

API Spec 5CT

Note: The 'L80-1' in API 5CT L80-1 refers to the minimum yield strength of 80,000 psi (approximately 552 MPa), with the number representing the unit of kilopounds per square inch (ksi). The actual yield strength of the pipe material typically ranges from 552 to 655 MPa, and the tensile strength ranges from 655 to 760 MPa.

Applicable Media

 

1. Oil and Natural Gas:
Petroleum, Natural Gas: Oil Tubing, Casing and Couplings for Medium-Deep and Deep Wells Cont
2. Sulfur-containing oil and gas wells:
Medium to deep oil and gas wells with conventional H₂S and moderate CO₂
3. General Fluids:
Well completion and oil production operations for sulfur-containing oil and gas wells
Note: API 5CT L80-1 is suitable for general H₂S-containing acidic oil and gas service conditions; 13Cr and 22Cr corrosion-resistant alloys should be selected for extreme high H₂S and high chloride ion severe service conditions.

Product Form and Manufacturing Process

 

Seamless steel pipe (Seamless)
Important: The L80-1 standard allows ERW straight-seam resistance-welded pipes, but the majority of commercial market supplies are seamless pipes; L80-9Cr and L80-13Cr only allow seamless pipes.
• Process: Hot rolled piercing + Extension Rolling + Tempering (Quenching + Tempering) Heat Treatment
• Outer Diameter Range: 114.3–508 mm (4-1/2"–20")
• Wall thickness range: 5.21–16.13 mm
• Features: Seamless, tempered and quenched martensitic structure; possesses standard resistance to sulfide stress cracking performance; suitable for medium-deep and deep oil and gas wells containing H₂S
• Typical applications: Downhole tubing and casing for deep wells containing H₂S; downhole wellhead connection components

Applicable Standards and Delivery Condition

 

• Standard: API Spec 5CT,ISO 11960,GB/T 19830
• Product Specification Level: Default to PSL1 (Basic Level); PSL2 is an annexed upgrade in Annex-H, which requires explicit agreement in the contract to enable.
• Delivery Status: Tempered (Quenching + Tempering)
• End Processing: Flat end, beveled end, threaded end (STC, LTC, BTC), Premium special fitting end
• Certificate: Provide material certificates in accordance with the procurement contract requirements; PSL1 does not have mandatory SR15 certificates and full-process traceability clauses. Upon activation of Annex-H (PSL2), SR15.1 and SR15.2 become mandatory.

Heat Treatment System and Welding Key Points

 

API 5CT L80-1 is delivered in a quenched and tempered heat treatment condition (normalizing and tempering), resulting in a tempered martensite microstructure to obtain sulfide stress cracking (SSCC) resistance and sulfur resistance.
1. Tempering treatment:
After quenching, high-temperature tempering is performed to obtain tempered martensite microstructure, balancing strength, toughness, and resistance to sulfide stress cracking.
2. Post-Weld Heat Treatment (as required):
After welding of tempered base material, the heat-affected zone loses its sulfide resistance. If stress relief is needed, it must be strictly carried out in accordance with WPS qualification and cannot be arbitrarily performed with high-temperature tempering to avoid damaging the tempered microstructure of the base material.
Important Reminder:
• After L80-1 welding, the weld and heat-affected zone no longer guarantee resistance to sulfide stress cracking. Acidic wells should minimize on-site welding as much as possible.
• L80-1 is suitable for general H₂S acidic media; 13Cr/22Cr corrosion-resistant alloys are selected for extreme severe corrosive conditions.
• L80-1 is suitable for general H₂S acidic media; 13Cr/22Cr corrosion-resistant alloys are selected for extreme severe corrosive conditions.

API 5CT L80-1 is suitable for oil tubes, casing, and couplings in medium-deep and deep oil and gas wells containing H₂S. The recommended applications are as follows:

 

Application Fields

  •  

    Oil and Natural Gas Drilling
    • Sulfur-containing medium-deep wells, deep well tubing, and casing
    • Conventional H₂S Acidic Oil and Gas Wells
    • Completion and oil production operations in oil and gas wells with moderate corrosion from CO₂
    • Underground wellhead connection part

Delivery and Customization

We offer flexible and reliable supply chain solutions to ensure you receive API 5CT L80-1 oil casing that perfectly matches your project requirements.
Customizable Material Forms

Form

Seamless Pipe

Conventional Range

Outer diameter: 114.3–508 mm; Wall thickness: 5.21–16.13 mm

Customization Capability

Hot-rolled seamless pipes, fixed-length cutting, bevel processing, pipe end threads, special heat treatment conditions

Why Choose Us? - Reliable Engineering Technology. Dependable Delivery.

We are not just a supplier, but a trusted materials partner for you in China.

Sample Support & Quick Response

Vertically Integrated Production

Own 20,000㎡ facility with 10+ automated lines (8,000+ tons/year). In-house tooling & die center enables rapid customization and effective cost control - no middleman markup.

Full Traceability

Strict Quality Control at Every Stage

Full traceability across key QC checkpoints throughout production. 100% compliant with ASTM/ASME, EN, and GB standards. Material test reports available with every shipment.

Professional Logistics & Packaging

Reliable Delivery & Export Packaging

10+ years exporting to Europe, North America, Southeast Asia & Middle East with waterproof and anti-rust protection, combined with flexible shipping options ensures safe and on-time arrival.

Complete Export Documentation

Sample Validation Before Mass Production

We provide free samples for quality verification, allowing you to place bulk orders only after approval. We ensure consistency from sample to mass production by accurate dimensional measurement and transparent manufacturing.

Summary of Core Advantages

Quenched and Tempered Sulfur-Resistant Comprehensive Properties

Minimum yield strength of 552 MPa, minimum tensile strength of 655 MPa; tempered martensite microstructure, possessing API standard SSCC resistance to sulfide stress cracking, suitable for conventional medium-deep and deep wells containing H₂S.

01

Quenching and Tempering Delivery

Tempered martensite microstructure, obtaining strength and sulfur resistance; different from J55/K55 hot-rolled normalized carbon steel.

02

Controllable Machining Performance

Supports standard API threads and Premium gas-tight special connections; heat-treated steel welding requires strict process specifications.

03

Supply Form

The commercial market is primarily composed of seamless steel pipes; the API standard permits ERW welded pipes with an outer diameter range of 114.3 to 508 mm.

04

Complies with Multiple International Standards

API Spec 5CT, ISO 11960, GB/T 19830, etc.

05

 

 

FAQ

Q: Does API 5CT L80-1 have PSL2? How to select it?

 

Q: What are the differences between API 5CT J55, K55, N80-1, N80Q, L80-1 How to choose?

 

Q: What is the maximum operating temperature for API 5CT L80-1?

 

Q: What is the welding performance of API 5CT L80-1?

 

Q: How is the corrosion resistance of API 5CT L80-1?

 

Q: Can API 5CT L80-1 replace ASTM A53?

 

 

Hot Tags: api 5ct l80-1, China api 5ct l80-1 manufacturers, suppliers, factory