-
Beta C (UNS R58640, Gr19, GB TB9)Beta C (Ti-3-8-6-4-4 / UNS R58640 / Gr19 / GB TB9) is a metastable beta titanium alloy with a nominal composition of Ti-3Al-8V-6Cr-4Mo-4Zr (abbreviated as Ti-3-8-6-4-4). It is a high-strength,...read more
-
Ti-10V-2Fe-3Al (TB6, Gr22)Ti-10V-2Fe-3Al (TB6, Gr22) is a metastable beta titanium alloy with a nominal composition of Ti-10V-2Fe-3Al, developed by the American TIMET company in the 1970s as a high-strength and...read more
-
Gr9 (TA18, Ti-3Al-2.5V)Gr9 (TA18, Ti-3Al-2.5V) is a near-alpha titanium alloy with a nominal composition of Ti-3Al-2.5V, one of the most cost-effective cold-worked grades in the titanium alloy family. This alloy, built...read more
-
Ti-6Al-4V (Gr5, TC4)Ti-6Al-4V (UNS R56400 / ASTM B348 Grade 5 / TC4) is an α+β phase titanium alloy, the most widely used and technically mature titanium alloy grade globally, accounting for over 50% of the global...read more
-
Ti-5Al-2.5Sn (TA7, Gr6)Ti-5Al-2.5Sn (TA7, Gr6) is a near-α titanium alloy, with a nominal composition of Ti-5Al-2.5Sn. It is one of the earliest developed and widely applied classic grades in the titanium alloy family....read more
-
Gr12 (TA10, Ti-0.3Mo-0.8Ni)Gr12 (TA10, Ti-0.3Mo-0.8Ni) is an α-type corrosion-resistant titanium alloy developed by adding 0.2%–0.4% molybdenum (Mo) and 0.6%–0.9% nickel (Ni) to industrial pure titanium. It is the most...read more
-
Gr7 (TA9, Ti-0.15Pd)Gr7 (TA9, Ti-0.15Pd) is an α-type corrosion-resistant titanium alloy developed by adding 0.12%–0.25% palladium (Pd) to commercially pure titanium. It is the most representative grade among...read more
Mar 09, 2019 · Gr5 ASTM B338 Titanium seamless tube Grade 5 titanium tube has combined toughness and high strength, has good fabrication and welding properties. This Grade 5...
Ti-6Al-4V (GR 5) is an alloy consisting of 6% aluminum, 4% vanadium, and 90% pure titanium. This grade has excellent corrosion resistance and higher...
Also known as alpha – beta alloy, Titanium Grade 5 Seamless Tubes is the workhorse alloy of the titanium industry. Titanium Grade 5 Welded Tubes is fully heat treatable in section sizes up to 15mm...
The room temperature tensile properties of the Titanium Gr 5 Cold Rolled Coiled Tube shall conform to the requirements prescribed, in the condition the tube is normally supplied in....
Ti Grade 5 tubing is 30% more grounded than steel, however is almost half lighter.Titanium Grade 5 Seamless Tube is 60% heavier than aluminum, however twice as solid....
ASTM B337/ ASME SB337, ASTM B338/ ASME SB338 UNS R56400 Tube: ASTM B337 Titanium Grade 5 Seamless Tube Size: 3.35 mm OD To 101.6 mm OD: ASTM B337 Titanium Grade 5 Welded Tube Size: 6.35 mm OD To 152...
